Announcement

Collapse
No announcement yet.

Random no crank...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Random no crank...

    Well, the last few weeks my car has sometimes been hesitant to crank, sometimes it would take 2 turns of the key to get it going. I have just been living with it. The other night scared me though, it was probably about half hour of messing with the key before i finally got it going. When i turn the key all the lights come on, and when i turn to crank nothing happened. The alternator and battery seem to be good according to my multimeter. I left it for the last 2 days and used another car because i have been busy, went out tonight and it started up just fine.

    any suggestions? Tumbler in the ignition? starter solenoid?

    i checked the obvious at the C101, and at the solenoid, nothing is loose...

    the randomness of it makes it frustrating.


    Full Build Thread Here

    #2
    Sounds like the ignition switch is about to take a dump.

    Comment


      #3
      so should i get #3,4,6? or just 3?


      Full Build Thread Here

      Comment


        #4
        just 3. the other are the tumbler

        Comment


          #5
          well i picked this up at the wrecker... let the fun begin, it feels really tight and has a strong spring in it...



          Full Build Thread Here

          Comment


            #6
            I'd try just the brown part with wires first, it'd be much easier than swapping keys and shit.

            Comment


              #7
              just got done, did what you said and just did the red/brown switch itself, took all of 20 minutes... car starts beautifully now. Found a broken solder on the old switch.... so i guess that was my problem.


              Full Build Thread Here

              Comment


                #8
                sweet, glad you got it fixed!

                Comment


                  #9
                  Did one as well recently not a bad job.
                  https://www.facebook.com/BentOverRacing

                  Comment

                  Working...
                  X