Do any of you guys run a single tip exhaust?

[turbo325i]

im not even running a tip, i cut the exhaust right after the sqaured section before the muffler and just left it. it doesnt really bother me, when i get my swap done i'll do it up right with a dual tip.

Doesnt bother you until you pass out from the fumes coming into the cabin... Plus its illegal.

Not that I havent run an open d.p.... but ya know

[evilnickwong]

what size tip on that ansa?

i've never measured it, i'd hazard a guess at 2.5"

[screwbiedoo15]

Just running 2.5" piping out of my single 2.5" in single 2.5" out magnaflow muffler

[///Maddog9000]

I just ordered that Magnaflow. Its a SS street series with 4" double wall outlet. Im doing a full 2.5" system with high flow cat. I'll post pics of the whole fabrication and let you see how it turns out. Should be done next week.

[richardb]

Single tip for the 318is valence... if you cut the valence and do it any other way, that is distasteful IMO. Hope this helps- 3'' full stainless

[Schwarz325]

sweet, yea i don't wanna cut it, I think i'm gonna run that 4 inch tip if i don't like it i'll cut it off and weld a smaller one on.

[El Gato Liso]

i have that exact same magnaflow muffler.



my exhaust is like this

[M50]===>-(CAT)====>-{MAGNAFLOW} pffffffffttt

[M-technik-3]

Single tip for the 318is valence... if you cut the valence and do it any other way, that is distasteful IMO. Hope this helps- 3'' full stainless

That's stainless? Cheap t304 then.

[Dude]

My car has a flowmaster muffler.

Lol @ wrong line, body roll, 4x4, bottle caps, etc

[richardb]

That's stainless? Cheap t304 then.

Actually the tubing is high quality and was expensive. Still looks great. The muffler is a chambered JBA. 421 or 409 stainless something like that. I asked Jon about the "rust" look which he said is normal for many stainless types.I'd like a nice magnaflow next.

[straight6pwr]

yup, ran a single exhaust tip on my 325is.



it was subtle, but sounded great. also, Magnaflow muffler weighed like 20lbs less than the stock one.

[Schwarz325]

I just got the magnaflow 14832 and the 4 inch tip is humangous lol. I may cut it off and weld something smaller on or just run it

[325issguy]

I run a stock m42 muffler off of ss rep headers. Car looks stock other than suspension from the outide, sounds a bit more gnarly though with the headers.

[Dj Buttchug]

if someone wants a stock single tip 318is muffler I have one for free