Announcement

Collapse
No announcement yet.

Idle control valve

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Idle control valve

    I finnished my m50 swap and could not do the exhaust system so I sent it to a muffler shop.(400.00$ latter)I had to drive it home after they were done .....The engine had only run for five minutes since it was installed..I took a chance and drove it home....It ran terribly with no idle and popping in the exhaust.When I got home I found the ICV valve was off the manifold I hooked it back up and the car wants to rev to about 4000rpm ....when I unplug the ICV vave the same thing happens.....any thoughts on what to do?

    Thanks

    #2
    Is your speed signal wire connected in the back of your cluster?

    Comment


      #3
      speed signal

      yes it is

      Comment


        #4
        I know on the M20 there is a sensor under the throttle body intake. I remember having the same effects after I did a tune up. Just forgot to plug it back in.
        ~ Puch Cafe. ~ Do business? feedback ~ Check out my leather company ~

        Instagram: @BWeissLeather

        Current cars:
        ~ '87 325 M30B35 swap
        ~ '87 535
        ~ 01 540 Msport 6spd
        ~ '06 X5 4.8is

        Comment

        Working...
        X