I am doing a swap using the following.
Getrag transmission
E30M3 flywheel/clutch/pressure plate.
e36 clutch fork with new TO bearing.
The slave clylinder seems to not be contacting the clutch fork. I could not remeber if I needed to use an E30 Clutch fork in the swap so I used the E36 one ont he tranny.
Any thoughts?
Thanks.
Getrag transmission
E30M3 flywheel/clutch/pressure plate.
e36 clutch fork with new TO bearing.
The slave clylinder seems to not be contacting the clutch fork. I could not remeber if I needed to use an E30 Clutch fork in the swap so I used the E36 one ont he tranny.
Any thoughts?
Thanks.
Comment