Took the car to MaximumPSI for Dyno Pull today

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dude8383
    Forum Sponsor
    • Jan 2005
    • 10387
    #1

    Took the car to MaximumPSI for Dyno Pull today

    I'm happy to say the least, obviously I want more power but this is right where I want to be at so that I can learn how to drive the car on the track.

    I talked to Mike about moderate turbo applications so we'll see.

    Specs:

    M50 Bottom End
    M52 Crank
    M52 Rods
    M52 Pistons
    S50 Cams
    16lb Flywheel
    3 angle valve job
    Ported Intake and Exhaust
    TRM Software

    Pull 1


    Pull 2


    Probe flew out on the 2nd pull thats why the dyno sheet shows a wacky A/F.

    Pull 3


    4th gear pulls.

    205hp @ 6500 rpm
    182tq @ 4650 rpm

    Everything checks out really nicely, motor is strong and my a/f curve looks good. Mike, the shop owner, said that TRM could remap the curve slightly and grab some fuel from the 5300 rpm area and get some more fuel towards the end of the revving range to get some more power. Overall I'm happy to see that I've built a healthy motor!

    $90 for 3 pulls.



    Last edited by dude8383; 09-10-2010, 01:17 PM. Reason: realized i didn't add motor spec
    IG: deniso_nsi Leave me feedback here
    Tags: None
    • matt
      No R3VLimiter
      • Oct 2003
      • 3731
      #2
      Do you have any with AFR scaled?

        Comment

        • BenM
          R3VLimited
          • Nov 2006
          • 2184
          #3
          Great numbers dude! Makes me want to start building my S50.
          Originally posted by BillBrasky
          E36's are the Stephen Baldwin of the 3 series family. They barely hold everything together and they only sold a lot because of the popularity of their older sibling.
          1991 318i Alpine II - S50/5-lug swapped - track car
          1989 325i Cirrusblau - Daily
          1970 2500 - Malaga over Grey Cloth
          2012 F350 6.7PSD

            Comment

            • Good & Tight
              Forum Sponsor
              • Apr 2004
              • 2057
              #4
              Nice #'s. Boost....you know you want it.
              Need a Turbo manifold? We have them in stock- Click here---> http://rapidspoolindustries.com/
              ____________________________
              E-mail Panayiotisx2@gmail.com
              Dyno vid http://www.youtube.com/watch?v=C7aM7..._order&list=UL

                Comment

                • dude8383
                  Forum Sponsor
                  • Jan 2005
                  • 10387
                  #5
                  Originally posted by matt
                  Do you have any with AFR scaled?
                  I'm not sure but I could probably shoot Mike an email to see if he can provide that. You mean where the AFR is in separate box right? Sorry if I have it wrong, I'm not that great at reading this.

                  Originally posted by BenM
                  Great numbers dude! Makes me want to start building my S50.
                  Thanks man. Get to work hahaha!

                  Originally posted by Good & Tight
                  Nice #'s. Boost....you know you want it.
                  Tempting man! For now, I'm at the limit in terms being able to drive this car on the track. I haven't pushed it hard enough so I still have plenty to learn. Once I get comfortable and really notice the need for more power, you bet I'll be contacting you...or Steve!
                  IG: deniso_nsi Leave me feedback here

                    Comment

                    Previous template Next
                    Working...