guys using ZF trannys .........

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • rThor432
    replied
    I'm not being a dick. Thought I'd start with that.. What you are saying would be a good 'heads up' for everyone if we knew what exactly you are talking about. I like to think I know these cars decently so I'm only asking to try to clear things up for others..

    Leave a comment:


  • Ara
    replied
    wtf you guys know every part on the damm car. Well fuck me for giving fellow e30 guys a heads up.

    Leave a comment:


  • jrdeamicis
    replied
    I put on my special hat. I get it now....

    And yes its an e30 part.

    Leave a comment:


  • rThor432
    replied
    The master cylinder should be a standard E30 part.. Definitely not an E36 part..

    Leave a comment:


  • jrdeamicis
    replied
    What are you talking about?

    Leave a comment:


  • Ara
    replied
    Originally posted by Wh33lhop
    I've driven over 150 miles with no clutch, you couldn't do it for a measly 2 or 3? :p

    Also, why are you futzing with the master cyl? It's not really a problem specific to the ZF trans, unless I'm misunderstanding things here.

    haha you guys are hardcore lol

    well I just thought since its a master from a 97 M3 trans Id mention the trans it belongs to.

    Leave a comment:


  • Dissembler
    replied
    So you put parts in the wrong way and it didnt work?

    I did my clutch master recently (zf trans, e36 slave cylinder) with no problems

    Leave a comment:


  • rThor432
    replied
    Originally posted by Wh33lhop
    Also, why are you futzing with the master cyl? It's not really a problem specific to the ZF trans, unless I'm misunderstanding things here.
    I was thinking the same. So he put the odd-ball 17mm bolt (iirc it's eccentric) through the bracket from the wrong side? I wouldn't think that would work so well..

    Oh yeah, I've driven roughly 150 miles on the street minus the slave cylinder (ie. no clutch actuation) as well. What fun.

    Leave a comment:


  • Wh33lhop
    replied
    I've driven over 150 miles with no clutch, you couldn't do it for a measly 2 or 3? :p

    Also, why are you futzing with the master cyl? It's not really a problem specific to the ZF trans, unless I'm misunderstanding things here.

    Leave a comment:


  • Ara
    started a topic guys using ZF trannys .........

    guys using ZF trannys .........

    make sure the clutch masters ring at the end is to the RIGHT of the bracket ( 17mm on the right , 13 on the left ) . My mechanic had it the other way around causing too much bending of the pivoting rod when depressing the clutch pedal. I found out the hard way when my pedal went to the floor at the track going 90mph =/ had to get towed off the track. Lucky for me my gf's parents live a couple miles from willow springs.......limping the car back in 1st gear was annoyingly fun.

    just a heads up guys
Working...