Help: M50 Cranks But Won't Turn Over

[tomgt325]

bump!

[Joe G]

check the resistance between Pins 43(-) and 16(+) on your DME, it should read around 600 ohms. I had a similar problem, i swapped out DMEs and now she is running.

[tomgt325]

check the resistance between Pins 43(-) and 16(+) on your DME, it should read around 600 ohms. I had a similar problem, i swapped out DMEs and now she is running.

I had no resistance on either DME. But come to think of it, I did have the cover off of both of them. Should that matter? I was getting resistance from other pins, just not 16+ and 43-.

Could it be the chip? I'm using the same bav auto chip in both DMEs.

[samiam3356]

Car ever have an alarm on it? Could be an issue of a secondary EWS issue.

[Matt-B]

what was the problem? I have fuel and spark, just not sure if my tank pressure is high enough...