Radiator sensor wiring?

[Frog]

Sure,

Fan part # 11521271846
Clutch Part # 11522245498

Not cheap, the combo is about $230 from tischer. Ive never been to find specific dimensions, but the m20 clutch is about 2.25" deep, and from what I understand, the td clutch is significantly thinner than that. Coupled with the thinner fan as well, and I think it's the solution to my problem. Maybe I'll just order one tonight and see.

Thanks for the #s! Ok, well if you order it, lmk the measurements once you receive it.

Samiam, will the SPAL fan fit with the A/C condenser? Also, the 1300 CFM is enough to cool the M50 for track use? I don't need to get the 'medium profile' with 1610 CFM?

[ChaseN]

Thanks for the #s! Ok, well if you order it, lmk the measurements once you receive it.

Samiam, will the SPAL fan fit with the A/C condenser? Also, the 1300 CFM is enough to cool the M50 for track use? I don't need to get the 'medium profile' with 1610 CFM?

Not samiam, but, one thing to remember, is on the track, a fan won't be doing much, if anything, except in the pits. Above 25mph or so, the speed you're driving is providing more airflow than the fan ever could.

I just ordered the fan & clutch, I'll let you know what happens. Hope it works, a lot of scratch for nothing if it won't fit...

[Frog]

Not samiam, but, one thing to remember, is on the track, a fan won't be doing much, if anything, except in the pits. Above 25mph or so, the speed you're driving is providing more airflow than the fan ever could.

Ok, I was wondering that. Thanks, this saved me from making a noob thread asking this.

just ordered the fan & clutch, I'll let you know what happens. Hope it works, a lot of scratch for nothing if it won't fit...

Sure could be a lot of scratch for nothing! $200+ for a fan + clutch that isn't even guaranteed to work is more than I would be willing to spend. For this reason, PLEASE let me know if it works, because if it does, I will have to consider it.