What header's?

[PedoBearE30]

i actually am in the same boat and i want the ones that bolt up to my down pipe i should not have clearance issues seeing how they just bolt up correct?
looking at these

http://cgi.ebay.com/ebaymotors/Exhaust-Manifold-Header-BMW-E36-92-99-M50-24V-Bolt-/180618128818?pt=Motors_Car_Truck_Parts_Accessories&hash=item2a0dadedb2

http://cgi.ebay.com/ebaymotors/Header-92-00-BMW-M50-DOHC-Equal-Length-Stainless-Stee-/220729561630?pt=Motors_Car_Truck_Parts_Accessories&hash=item336481d21e

http://cgi.ebay.com/ebaymotors/Equal-Length-Stainless-Steel-Header-92-00-BMW-M50-DOHC-/130477961221?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e6117b005

[PedoBearE30]

would love for someone who running these to chime in

[Chrisv006]

I have the cheap Ebay headers. Bolted on just fine. I had to massage near the motor mount a little. They look pretty good. If you keep your eyes open, I got mine for $68 shipped on ebay.

My suspension is completely off the car so I cant comment on CAB's yet.

[wobbie]

I may get these

http://cgi.ebay.com/ebaymotors/Equal-Length-Stainless-Steel-Header-92-00-BMW-M50-DOHC-/130477961221?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e6117b005

[PedoBearE30]

anyone else?

[wobbie]

i just bought these well see how they fit.

http://cgi.ebay.com/ebaymotors/Exhau...item2a0dadedb2

[PedoBearE30]

let us know how they fit and sound once you got em on pics please

[Goya20]

Which are great for the m20?

[wobbie]

i dont have the engine in the car yet. the goal is for the end of the month

[Adrian_Visser]

My racelands did require a lot of modification. I had to drill out the holes in the header to block flange, had to beat a dent into the subframe and I needed alot of swaybar spacing. The downpipe flange sits 2" off the ground with H&R sports, I am considering having the flange relocated or removed completely since it is now the low point on the car. They sound awesome though.

[Wishno87]

My racelands did require a lot of modification. I had to drill out the holes in the header to block flange, had to beat a dent into the subframe and I needed alot of swaybar spacing. The downpipe flange sits 2" off the ground with H&R sports, I am considering having the flange relocated or removed completely since it is now the low point on the car. They sound awesome though.

We must have different versions of the racelands because the only thing I had to do was get treehouse cabs. More than a couple inches of subframe clearence.

[Slovik]

Wishno87 which Racelands are you using, maybe a link to the ones that you bought. Also can anyone tell me what fitment issues there are using the stock S52 exhaust manifold.

Thanks,

Seth

[Wishno87]

Wishno87 which Racelands are you using, maybe a link to the ones that you bought. Also can anyone tell me what fitment issues there are using the stock S52 exhaust manifold.

Thanks,

Seth

I got them from a Z3 guy on bf.c

You shouldn't have much problem using those manifolds. Just look up "OBD2" manifolds.

[Adrian_Visser]

Yup mine are different. I never knew they made a two piece set too. Here are mine:

[Wishno87]

Those look pretty nice. Does the location of the flange cause ground clearence problems?