I guess I should finally post something, doing a m50 swap soon

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • e30rapidic
    replied
    awesome...we can compare notes as I am doing my S50 install right now

    Leave a comment:


  • Lawson509
    replied
    Get a porsche 944 booster. It will save you lots of time and effort.

    Leave a comment:


  • 2poor2tune
    replied
    also i plan on slotting the brake booster holes and sliding it over as far as necessary and then back as far as i can after swap

    Leave a comment:


  • I guess I should finally post something, doing a m50 swap soon

    alright so i have been on this site for a few years now back and forth buying e30's and hondas. i picked up a 90 325i a while back with a broken timing belt. long story short im going to pick up a m50 out of a 93 525i tomorrow. while i have spent many hours doing research i would like to get an ok from some people who have done it before. keep in mind i have swapped many engines well over 100 in the past 5 years but mostly hondas so eh..

    heres what i have gathered from the swap and what i plan on doing

    1. m50 from 93 525i.. still not sure if its a vanos or non vanos engine???

    2. using my gatrag 260 tranny, clutch, flywheel. (have to bend linkage and make new tranny brace and use stock 260 driveshaft)

    3. e36 aluminum engine mount brackets w/ e28 green mounts

    4. wiring :/ i have done many wiring jobs including wire tucks and all that and more to hondas and it seems very simple to swap out the 15-20? pins i have to work with at the 101 clip but i worry to much until its done so thats still bothering me. here is the info i am using and it would be nice to have someone confirm it for me



    i need a red tag non ews computer? and it will work with the 525i harness still as long as i keep it obd1?

    i am not to concerned about the exhaust for now but more about getting the car running.

    any tips? hints? just a "your doing it right" would really boost my confidence here haha
Working...