coolant/heat issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Joe G
    R3VLimited
    • Apr 2010
    • 2942

    #1

    coolant/heat issues

    So the first time i took the car out, it got hot(i forgot to bleed the coolant). I pulled over, shut the car off, and my expansion tank was overflowing like a mofo. I let the car cool down for 15 or so mins and then drove home (2miles) at around 50mph with the hood popped, and heat blasting. At this time the heat was blowing hot air.

    The next day i bled the coolant and took the car for a drive (45 mins) and it ran fine, no getting hot (temp gauge needle at about 5 degrees past vertical). But now the cars heat isnt working. Whats the issue?


    Current Car: 2011 BMW 135i, M-Sport, 6 speed

    Originally posted by lambo
    Sounds like you need a massage.
    Originally posted by kpeng
    Who the hell is Vlad?
  • nomansland92
    E30 Mastermind
    • Aug 2010
    • 1657

    #2
    You might still have an air pocket. I had this problem for a long time.
    Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.

    IX being restored here

    Ix turbo build here

    Comment

    • FredK
      R3V OG
      • Oct 2003
      • 14745

      #3
      It could be that your thermostat failed in the open position due to the overheating. Replace it and bleed the system again.

      Godspeed.

      Comment

      • Joe G
        R3VLimited
        • Apr 2010
        • 2942

        #4
        If the car isnt overheating am i giving anything up/doing any damage aside from not being able to warm up the cabin on a cold and lonely night?


        Current Car: 2011 BMW 135i, M-Sport, 6 speed

        Originally posted by lambo
        Sounds like you need a massage.
        Originally posted by kpeng
        Who the hell is Vlad?

        Comment

        • ck_taft325is
          R3V OG
          • Sep 2007
          • 6880

          #5
          It's a bitch, but try dropping the coolant out and checking your thermostat. Hot pan of water, meat thermometer and see when it opens up (if it does at all).

          Replace if it needs and then bleed the system again. My vote is probably an air bubble. Are you loosing coolant at all? Is your driver's side foot well nice and dry?
          Need a part? PM me.

          Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

          Comment

          • Joe G
            R3VLimited
            • Apr 2010
            • 2942

            #6
            Everything is dry. But if the car isn't overheating, and I'm getting no heat I'm not at risk of doing any harm right?


            Current Car: 2011 BMW 135i, M-Sport, 6 speed

            Originally posted by lambo
            Sounds like you need a massage.
            Originally posted by kpeng
            Who the hell is Vlad?

            Comment

            • ck_taft325is
              R3V OG
              • Sep 2007
              • 6880

              #7
              As long as the coolant isn't disappearing and there's no white smoke, etc, you should be fine. I would keep investigating why you're not getting heat though. Could be a heater core valve is stuck or any number of issues. BUT, if you're not over heating, there's no Houdini coolant... you're good to drive. All cold and lonely.
              Need a part? PM me.

              Get your Bass on. Luke's r3v Boxes are here: http://www.r3vlimited.com/board/showthread.php?t=198123

              Comment

              • Joe G
                R3VLimited
                • Apr 2010
                • 2942

                #8
                well the coolant level does go down little by little, so im going to check all my hose clamps tomorrow and see if there is in fact a leak. But there is no white smoke, and when it goes down its only a little bit at a time.


                Current Car: 2011 BMW 135i, M-Sport, 6 speed

                Originally posted by lambo
                Sounds like you need a massage.
                Originally posted by kpeng
                Who the hell is Vlad?

                Comment

                • samiam3356
                  E30 Mastermind
                  • Jul 2009
                  • 1901

                  #9
                  Had a similar issue and my spider hose was colapsing by the firewall. Didn't notice until I was under the car and happen to look up and see it. Ended up having to put some clamps on it to keep it from colapsing.

                  Originally posted by Roysneon
                  $5 shipped?
                  Originally posted by MarkD
                  You are a strange dude, I'n not answering any more posts from you.

                  Comment

                  • Mr.SWISS
                    E30 Fanatic
                    • Nov 2005
                    • 1251

                    #10
                    Head top
                    Spider bottom
                    Originally posted by 325Projectz
                    don't listen to the diagram... listen to mr. swiss.
                    :nice:

                    Comment

                    • MR 325
                      Moderator
                      • Oct 2003
                      • 37826

                      #11
                      Originally posted by Mr.SWISS
                      Head top
                      Spider bottom
                      Exactly, make sure your heater hoses aren't backwards.

                      Otherwise, bleed it again. There's no reason the heater shouldn't work and it's good to have it available.
                      BimmerHeads
                      Classic BMW Specialists
                      Santa Clarita, CA

                      www.BimmerHeads.com

                      Comment

                      • MattM
                        E30 Modder
                        • Apr 2009
                        • 931

                        #12
                        Originally posted by Mr.SWISS
                        Head top
                        Spider bottom
                        umm, try again?;)


                        Full Build Thread Here

                        Comment

                        • Mr.SWISS
                          E30 Fanatic
                          • Nov 2005
                          • 1251

                          #13
                          Originally posted by MattM
                          umm, try again?;)
                          Originally posted by 325Projectz
                          don't listen to the diagram... listen to mr. swiss.
                          :nice:

                          Comment

                          Working...