e36 airbox in 24v swap

[rlddlr53]

anyone ever get a e36 airbox to fit? any kind of modification?

[ak-]

Yeah, there are some pictures floating around on R3v.
It looks proper good.

[ak-]

m42 radiator cleans it up well.

Pictures courtesy of "DanThe"

No ABS, its just not going to happen with a pump down there!

I used an M30 airbox on my last car with ABS fitted, my inlet temps are now up to 10°C cooler as the E36 box has a huge intake hole directly behind the headlights

[e30polak]

I've always like the look of the e36 airbox.

[e30rapidic]

on my to-do list...

[rlddlr53]

Well I have the abs pump, and I cut the e36 box in half, got rid of the plastic below the filter. Got it to fit with a slight bend in the intake boot. If I removed the bracket for the e30 airbox I can get it to sit right, but I think I am going overboard- only doing this for BAR appt. My setup looks mickey mouse to the max

[JdmEuroNorth]

AK- Where can I get that rad support bracket?

[MR 325]

AK- Where can I get that rad support bracket?

The one holding the radiator? It's factory on late model cars...

[jrdeamicis]

m42 radiator cleans it up well.

Pictures courtesy of "DanThe"

The third one is my car!

[e30rapidic]

question - what box is needed to make this work with a 3.5 MAF?

[Leo_328i]

question - what box is needed to make this work with a 3.5 MAF?

The box out of either a Euro 3.2l E36 M3, Euro 3.2l M Roadster/Coupe or S54 powered M Roadster/Coupe.

[blackhawkimpact]

I use the e34 mailbox for my 3.5 MAF