Have a 24V swap with a G260? Want a DSSR?

[Spitfi-r]

Got mine installed and the car on the road.
Made a huge difference in shifter feel (without changing any other parts).
For my track car this was money well spent.

[Rob@UUC]

The holidays screwed my delivery and took longer but it's here now.

I replied to your email Rob about the DSSR not fitting to my Z3 shifter. The bushing is sticking further out 1/16 of an inch and I wanted to make sure that it would be okay to grind that down so the shifter can go in the DSSR. Just worried about metal to metal shaving. Advice?

Yes, you can grind the plastic down.

BMW (actually, Valeo, the supplier of BMW shifters) did a dumb thing and changed all new BMW shifters to have this plastic lip, which saves them the 3¢ of installing the yellow compression washers. And of course, that plastic lip wears out faster and makes all new BMW shifters get sloppier even faster than the old ones.

Just grind the plastic down to the metal lip - do not grind the metal. That will be the correct dimension.

[e30austin]

^ yes, it's fine. I've had to do it on a couple shifters and haven't ever had an issue. FWIW, at least.

[bernzpeed]

The holidays screwed my delivery and took longer but it's here now.

I replied to your email Rob about the DSSR not fitting to my Z3 shifter. The bushing is sticking further out 1/16 of an inch and I wanted to make sure that it would be okay to grind that down so the shifter can go in the DSSR. Just worried about metal to metal shaving. Advice?

[e30austin]

Awesome, I will go stick some cash in the bank and order one today. Woot!

[Rob@UUC]

Currently in stock? What's the estimated delivery time if I ordered one today? Starting my swap this weekend and would like to have it all ready to go.

Yes, in stock right now. Delivery time by UPS Ground depends on how far you are from Atlanta, GA... but nowhere in the continental USA is longer than 5 business days, most places within 3.

Extra-cost UPS options are available including 2nd Day and Overnight. Exact cost depends on where you are located and will be displayed when you enter your address on our website, or feel free to call us directly.

[e30austin]

Currently in stock? What's the estimated delivery time if I ordered one today? Starting my swap this weekend and would like to have it all ready to go.

[Rob@UUC]

Hey Rob, is this in stock right now? Im about to place an order

These are in stock.

If you do a short shifter for the stock tranny and then later do a 24v swap and keep the tranny what needs to be done to correctly position the shifter again.

If you do a short shifter with the original M20 motor and original transmission, you would use our shifter part number USSE3 and DSSR187.

If you later switch to any M50/S50/S52 and keep the original transmission, you will use the same shifter but change to DSSR187-10.

[Link]

If you do a short shifter for the stock tranny and then later do a 24v swap and keep the tranny what needs to be done to correctly position the shifter again.

[dnick]

Hey Rob, is this in stock right now? Im about to place an order

[Rob@UUC]

damn i just bought the DSSR on Christmas Day and I didn't get any deals. :-(

There were about a half-dozen package deals over the holiday vacation that were valid.

[bernzpeed]

damn i just bought the DSSR on Christmas Day and I didn't get any deals. :-(

[Rob@UUC]

are there any Christmas specials going on from UUC?

Always check:

http://store.uucmotorwerks.com/articles/specials.htm

[bernzpeed]

are there any Christmas specials going on from UUC?

[JRKOUPE]

After a 6.5 month wait I finally got mine!
Should I feel lucky?

no..we all recd ours..lol

let us know how it goes....


mine wont be in for weeks.