Have a 24V swap with a G260? Want a DSSR?

[Jand3rson]

Color me interested. I twisted my selector rod 10° and it put my shift lever in pretty much the right spot, but I'd like to have a purpose-built kit, as well as LOVING to see that slop go away.

[Wh33lhop]

You're not thread crapping at all. However, the DSSR isn't really a solution for the shift linkage in the swap, more of a solution for the side-to-side slop still present in the gearshift after all the bushings have been replaced. I modified my selector rod for free just by heating it up--however there is still slop in my linkage. The DSSR gets rid of that.

I am not really vested in this beyond getting one for myself and telling r3v about the possibility, because I really thought there would be more interest. Seems like I was wrong. :p

[kingston]

Wheelhop,

I'd be interested in the idea, but honestly not for that price. The total cost into modding mine was maybe $20. I do NOT mean to poop on your thread, but there was an element of wanting feedback to your post.

This is just my $0.02, because I certainly paid a lot more than other people would have for other things, AND I have an exhaust shop right around the corner to weld my setup.

Again, I like the idea, but with the cost of everything else on the swap, that would be just a bit too much for me.

Your mileage may vary!

[Wh33lhop]

This is a cross-post but I'm surprised at the lack of feedback here.

Basically, UUC can make "twisted" DSSRs that would give an improved shift feel and keep the ahifter in the right position for the 24v/g260 swap. I thought there would be a good bit of interest in a group buy but there have only been one or two bites since I posted in general. This is a second attempt to garner some sort of interest for a group buy at about $120 shipped if we get 25 people. Show me some love.