84' M10 to S50 need wiring help

[IrocE30]

ok so all the wires in the c101 are connected, now i've heard that there are some wires under the glove box that will also need to be conected to the x20. is that correct?

[Mr.SWISS]

Lookin at MR.swiss's link the o2 sensor relay( pin 6 on c101) is not used on the x20?

6 goes to 22 on X20 O2 sensor heater relay...

[Mr.SWISS]

Ok, just so I understand correctly, I pretty much get the pin-out of the x20/c101 (round) and swap the corresponding rectangular c101 in place of the round c101 ones (from the link Mr. Swiss posted of Hick's 'diagram')?

Could, or you could just pin it out yourself ie: pin #4 goes from pin #4 on rectangular c101 to #4 on the round C101 and goes to the #12 on the X20= coolant temp sensor.

[Hey_You]

Ok, just so I understand correctly, I pretty much get the pin-out of the x20/c101 (round) and swap the corresponding rectangular c101 in place of the round c101 ones (from the link Mr. Swiss posted of Hick's 'diagram')?

[IrocE30]

Lookin at MR.swiss's link the o2 sensor relay( pin 6 on c101) is not used on the x20?

[IrocE30]

ok i have figured out most of my wiring from AKG Motorsports wiring charts. but what i cant figure out from those charts is the fuel pump from the c101 to the x20. which pin should i go to one the x20? also Pin 17 on the c101 where should that go on the x20?

[Mr.SWISS]

Fuckin owe me son........

http://www.r3vlimited.com/board/showpost.php?p=805485&postcount=9

[IrocE30]

It's on here, search M20 swap and you will find it.

I've searched and found very little on the 318i connector that comes out of the fuse box. the connector i have only has 8 wires, the one one on early m20 cars have many more.

[328ijunkie]

http://www.markertmotorworks.com/Custom_24v_Harness_.html

;)

[Mr.SWISS]

i have an early model 84' 318i i'm swaping in a 95' usS50b30. need help with wiring. Diagrams and pinouts anything will help.

It's on here, search M20 swap and you will find it.

[IrocE30]

i have an early model 84' 318i i'm swaping in a 95' usS50b30. need help with wiring. Diagrams and pinouts anything will help.