s50 crank with m52 pistons?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • thedean
    Wrencher
    • Sep 2010
    • 262
    #1

    s50 crank with m52 pistons?

    I have at my disposal a m52 shortblock with all the internals as well as an s50 crank.

    Anyone know what my static CR will be if I use the s50 crank? The piston should move up 1mm total due to the difference in stroke increasing from 84mm to 86mm. Will this cause interference?

    What I would really like, if anyone has them, or knows where I can find them, are the wrist pin heights for all the different m5x pistons.

    Thanks,

    Michon
    Tags: None
    • blink977
      Noobie
      • Jun 2010
      • 24
      #2
      Use compression ratio calculator. Here's one: www.dragsource.com

        Comment

        • thedean
          Wrencher
          • Sep 2010
          • 262
          #3
          Originally posted by blink977
          Use compression ratio calculator. Here's one: www.dragsource.com
          Yes but I don't know the volumes of the compression chamber or piston indents, stock HG thickness etc... I was hoping someone could chime in about that lol.

            Comment

            Previous template Next
            Working...