Announcement
Collapse
No announcement yet.
Right motor mounts?
Collapse
X
-
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Originally posted by 328ijunkie View Post
Comment
-
Never had an issue. Been running them in various cars for years...
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
The AKG mounts will sit the motor further back in the engine bay and lower than the E28 M5 mounts.
This is better IMO, for the heavier weight of the M/S50.88 325is. S54, CSL airbox, Motec M800, Motec C127, Motec PDM15, Stoptech STR, MCS 2 way coilovers, Forgeline wheels, Recaro SPA, Eisenmann, Personal, lots of custom.
90 318is. As new OEM+, BBS LM, AST 4210 2 way coilovers, Wilwood SL6R/SL4R, Dynaudio, Recaro Experts
Comment
-
Ive used the AKG mounts (im a vendor for them) and as long as you dont do any crazy shimming of the E28 mounts they work perfect. Ive used both in customer cars...
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
for those using the e28 motor mounts, did you shim yours? I did about 1/4in drivers side and 1/2in on the passenger side to lift the oil pan and give my exhaust manifolds some clearance. I'd be interested to hear responses on how it worked out for those that didn't shim their e28 mounts and what sort of clearances you've had.
Comment
-
Originally posted by ScHpAnKy View Postfor those using the e28 motor mounts, did you shim yours? I did about 1/4in drivers side and 1/2in on the passenger side to lift the oil pan and give my exhaust manifolds some clearance. I'd be interested to hear responses on how it worked out for those that didn't shim their e28 mounts and what sort of clearances you've had.Originally posted by 325Projectzdon't listen to the diagram... listen to mr. swiss.
Comment
Comment