FYI - some N52 oil pan research

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • 328ijunkie
    replied
    You BDMing into it?

    Leave a comment:


  • nando
    replied
    Bump.

    So, it turns out MSV70 is pretty easy to hack. It's set up a lot like the motorsports DMEs. I don't have an EWS delete yet, but you'd only need a couple modules to make it happy. Who wants to try it? :p

    Leave a comment:


  • wazzu70
    replied
    Exactly, I just meant you would most likely use a pwm output to control it. You would be on your own though to come up with a control strategy.

    This is why even if a standalone COULD control things, you are way ahead just using the factory ECU if possible.

    Leave a comment:


  • nando
    replied
    maybe physically but software support will be limited. there's not going to be a "valvetronic" table in most standalones or dedicated outputs for them. Ones that have that will cost more than a nice E30.

    and everyone always forgets about the cost for tuning. if you pay $10,000 for a computer you're not going to get the thing tuned for $0..

    Leave a comment:


  • wazzu70
    replied
    Shouldnt most standalones be able to actuate the valvetronic?

    If you can use the factory ECU though...do that for sure!

    Leave a comment:


  • 328ijunkie
    replied
    As did I. locking out valvetronic is far from ideal for a street car, esp given the intake manifold and everything is designed around not being under true 'vaccuum'.

    Leave a comment:


  • nando
    replied
    yeah, but those are race motors. I thought the context here was a swap for a street car.

    Leave a comment:


  • 328ijunkie
    replied
    Most of the crazy N52s ive seen people building out there have it locked out and run off a cable TB.

    Leave a comment:


  • jntar
    replied
    Originally posted by nando
    Why bother with the n52 then? Isnt valvetronic kinda the point?

    A race car is the 5% of the time when it makes sense. The motor will mostly be at WOT, low end drivability a fuel economy dont matter.
    I have no intentions on swapping an n52 into my e30. I'm just providing info on what "could" be done.

    Leave a comment:


  • nando
    replied
    Originally posted by jntar
    True, however valvetronic can also be locked at full lift manually with a block off plate and a traditional throttle body or bodies can be added.
    Why bother with the n52 then? Isnt valvetronic kinda the point?

    A race car is the 5% of the time when it makes sense. The motor will mostly be at WOT, low end drivability a fuel economy dont matter.

    Leave a comment:


  • jntar
    replied
    Originally posted by nando
    Im pretty sure the stock ecu is very doable. Ill get to it eventually.

    Imo, 95% of the time standalone isnt going to be as good as the stock computer, and the cost will always be higher.
    If you're serious I suggest giving RMP Motors a call. They are producing some crazy n52 race cars.

    Leave a comment:


  • jntar
    replied
    Originally posted by 328ijunkie
    standalone running valvetronic? only the very very top dollar ones maybe
    True, however valvetronic can also be locked at full lift manually with a block off plate and a traditional throttle body or bodies can be added.

    Leave a comment:


  • 328ijunkie
    replied
    standalone running valvetronic? only the very very top dollar ones maybe

    Leave a comment:


  • nando
    replied
    Im pretty sure the stock ecu is very doable. Ill get to it eventually.

    Imo, 95% of the time standalone isnt going to be as good as the stock computer, and the cost will always be higher.

    Leave a comment:


  • jntar
    replied
    If Stig is who I think he is from e90post, he is making close to 300 crank.

    There was a question about ecu and swapping. I'm fairly confident a competent tuner could easily get a haltech or motec unit to work as most of the e90 race cars run them. Problem is these units are well into the $5-8k range :(

    Leave a comment:

Working...