Coolant hose

[CHITTY]

Anybody have a s52/m52 swap that is running a m20 rad and late model resivoir tank? I am trying to figure out what hose to use from the tank to the metal coolant pipe under the intake. I'm thinking that I could use #8 (11531740649) http://www.realoem.com/bmw/showparts...89&hg=11&fg=35. Any help is appreciated.

And yes I have searched but came up with nothing solid. Thanks again.

[MaxBell]

I'm using the E34 rad hoses.

[328ijunkie]

I always swipe a section of the m20 hose.

[m_dudey]

i used a portion of the m20 hose as well

[CHITTY]

Thanks, I cut mine to short when I did, and it seems to be a tad bit small to fit over the metal pipe. Was just wondering if anybody did it different.

[bzboardz]

Thanks, I cut mine to short when I did, and it seems to be a tad bit small to fit over the metal pipe. Was just wondering if anybody did it different.

mine was to small in diameter, finally got it on there though

[mtlbloodshot]

What hose must be used when using a M42 RAD on a M52?

[tonytony]

IIRC I used e36 hose and trimmed a bit, I'm using a m42 radiator

[blackhawkimpact]

^Yes