OK, so local shop that does a bunch of swaps is doing up a straight 91 318is for me with an S50. They'll be freshening the motor up with all new gaskets, head gasket, etc. basically everything but rings.
Leaving the E30 tranny and 3.73 lsd in the car, using a 944 brake booster.
Exterior and interior need some TLC but its all stock and a straight car.
Is there anything else I should do or have done before the motor is installed? Convert the rack to non-power, etc.?
I'll be doing the suspension next, buying parts while the swap is being done over the next couple weeks. Since the S50 is only about 50-60# heavier I assume the 325/318 aftermarket suspension will be fine.
Anything special I should ask for as far as the swap goes from the shop, something different with the exhaust, etc.?
Leaving the E30 tranny and 3.73 lsd in the car, using a 944 brake booster.
Exterior and interior need some TLC but its all stock and a straight car.
Is there anything else I should do or have done before the motor is installed? Convert the rack to non-power, etc.?
I'll be doing the suspension next, buying parts while the swap is being done over the next couple weeks. Since the S50 is only about 50-60# heavier I assume the 325/318 aftermarket suspension will be fine.
Anything special I should ask for as far as the swap goes from the shop, something different with the exhaust, etc.?
Comment