Coolant Hose Kit?
Collapse
X
-
Tags: None
-
i used a good amount of e30 hoses cut to fir and even a few random 90 degree ones from auto zone. if i remember correctly i had quite a few brand new e36 hoses left over that i ended up not using. kinda pissed me off. not i was using the m42 rad. so i may have a different application than you -
If you plan on replacing all the hoses anyhow (which you likely should) - then you'll end up using most of those, possibly all of them, depending on your radiator/expansion tank setup, and whether or not you plan to run your heater (becuz streetcar).
In most cases the lower radiator hose is a bit too long for the e30 fitment. I ran mine without cutting it, but it rubs against the front of the motor near the timing chain tensioner, and I need to cut it shorter so that it clears.Current:
1991 325i Sedan - S50 Swap
1988 325i Cabrio
Past:
1991 M3
1991 318is
1985 325eComment
-
I'd only order the e36 upper & lower radiator hoses. Get the rest of the hoses at your local autoparts store as they're either straight shots or custom.1997 540i/6 - stock
1985 325 - M50NV - Getrag 250 - 2.79 LSD - MS2/e -LC-1 - 750cc injectors - Blunttech Manifold - HX35 - AEM UEGO
1991 318i - M50NV - Getrag 240 - 4.10 open - e36 rack - Smileys - 55w 5000k HIDsComment
-

Comment