Announcement

Collapse
No announcement yet.

Oil blowing onto block

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Oil blowing onto block

    After a half hour of driveing my car blows oil onto the block just above the pan I replaced the gasket with a decent ammount of permitex super black let sit overnight last night my car was leaking on the block above the pan on the drivers side but really high up the block so I'm not sure if it's the oil pan seal or not I have an obd1 m50 venos

    #2
    Having a hard time visualizing what you're talking about.

    Do you have a leak at the back of your engine that runs down the block onto the oil pan?

    If this is the case check your valve cover to be sure the half moons that seal the cam access in the back of the head are seated correctly.

    If its leaking at the front of the block then check the oil filter housing.

    Comment


      #3
      Originally posted by 318 slammin View Post
      After a half hour of driveing, my car blows oil onto the block just above the pan.

      I replaced the gasket with a decent ammount of permitex super black, let sit overnight.

      last night my car was leaking on the block, above the pan, on the drivers side, but really high up the block. I'm not sure if it's the oil pan seal or not.

      I have an obd1 m50 venos
      sorry, I could barely read it without punctuation.

      if it's leaking on the block, above the pan, I'm not sure what would bring you to the conclusion that it's the pan gasket. gravity tends to pull down, not up. there are a bunch of places to check for a leak - vanos line and cam position sensor come to my mind.

      Comment


        #4
        Originally posted by RobertK View Post
        Having a hard time visualizing what you're talking about.

        Do you have a leak at the back of your engine that runs down the block onto the oil pan?

        If this is the case check your valve cover to be sure the half moons that seal the cam access in the back of the head are seated correctly.

        If its leaking at the front of the block then check the oil filter housing.
        It's leaking around where my driverside motor mount is but it's wet a decent way up my block

        Comment


          #5
          Originally posted by butters View Post
          sorry, I could barely read it without punctuation.

          if it's leaking on the block, above the pan, I'm not sure what would bring you to the conclusion that it's the pan gasket. gravity tends to pull down, not up. there are a bunch of places to check for a leak - vanos line and cam position sensor come to my mind.
          Before I changed the gasket it was soaked all over my pan blowing on my exhaust and smoking a ton now it's just the drivers side and I don't think getting on my exhaust it smokes while I'm stopped

          Comment


            #6
            Update on my issue, it is leaking from somewhere on the top middle of my block on the drivers side. Could it be a sensor?

            Comment


              #7
              Sounds to me like oil filter housing gasket. Also check your vanos line.

              See this link http://www.bmwtips.com/tipsntricks/oil/housing.htm

              Comment


                #8
                Plus one for the VANOS line. I changed my friend's camshaft sensor and ended up loosening it by accident. Car was pissing oil everywhere, eventually I figured out that it was leaking from there.

                Originally posted by ROLLingKING
                i have a bronzit and plan on making it look sweet.
                Originally posted by slammin.e28
                Moral of this story?

                If you drive your e30 on stairs, you're gonna have a bad time.

                Comment


                  #9
                  It doesn't seem wet near my filter housing, but also it's kinda in a shitty spot to eyeball. would the venos line or oil filter housing gasket cause it to leak at the middle of my block? I might just replace both incase but I am wondering if if could be anything else near the middle of the block

                  Comment


                    #10
                    lots of things in that area, vanos line, oil pressure sensor, oil filter housing, all can cause a wet spot in the area you are describing.
                    I saved 15% on my Bimmer parts by switching to ...



                    Comment


                      #11
                      Originally posted by 318 slammin View Post
                      It doesn't seem wet near my filter housing, but also it's kinda in a shitty spot to eyeball. would the venos line or oil filter housing gasket cause it to leak at the middle of my block? I might just replace both incase but I am wondering if if could be anything else near the middle of the block
                      You're gonna have to get dirty and pull some stuff out of the way to properly diagnose the issue. But most likely the VANOS oil hose or oil filter housing gasket is toast.

                      Comment


                        #12
                        It could be the plugs on the filter housing or the filter housing itself.

                        Comment


                          #13
                          Originally posted by M3PO View Post
                          It could be the plugs on the filter housing or the filter housing itself.
                          You have a great screen name.
                          For all things 24v, check out Markert Motorworks!
                          Originally posted by mbonanni
                          I hate modded emtree, I hate modded cawrz, I hate jdm, I hate swag, I hate stanceyolokids, I hate bags (on cars), I hate stuff that is slowz, I hate tires.

                          I am a pursit now.

                          Comment


                            #14
                            Originally posted by Roysneon View Post
                            You have a great screen name.
                            Lol thanks!

                            Good luck/free bump for OP!

                            Comment


                              #15
                              I Drove the car yesterday to make it leak so that I could findwhere it's coming out of. it started leaking then just stopped? But still leaks after driving a long distance but will stop leaking after 5 min, it's wierd but I'm trying to narrow down wat I should start looking for. I would think if the filter housing was leaking it woulld be all the time that it leaks correct? So I'm thinking maybe vanos line? Because vanos is not engaged at idle?

                              Comment

                              Working...
                              X