Any swap shop recommendations?

[ACHTUNG]

I sourced 95% of my own parts and had a shop do the swap. Would you like me to forward you my detailed spec and cost spreadsheet? It will open your eyes to what you should expect to pay if you source your own parts and hire a shop to do the swap.

Of course there are items on the list that were upgrades for the swap and weren't necessarily needed which increased my cost for parts.

[essi1553]

I sourced 95% of my own parts and had a shop do the swap. Would you like me to forward you my detailed spec and cost spreadsheet? It will open your eyes to what you should expect to pay if you source your own parts and hire a shop to do the swap.

Of course there are items on the list that were upgrades for the swap and weren't necessarily needed which increased my cost for parts.

I dont mean to be a bother but this would be ideal.

My email is essi1553@yahoo.com and thanks for offering this, everything seems easier to understand on a spreadsheet :)

[ACHTUNG]

I dont mean to be a bother but this would be ideal.

My email is essi1553@yahoo.com and thanks for offering this, everything seems easier to understand on a spreadsheet :)

Sent you an email with the spreadsheet.

It's amazing how quickly the parts list grows due to the "while you're in there" effect.

[essi1553]

Sent you an email with the spreadsheet.

It's amazing how quickly the parts list grows due to the "while you're in there" effect.

Wow, just wow... Thanks for this, more than I could ever ask for. IT must purrr beautifully.

I'm going through your upgrades to try and get a base, even though I see your labor cost (which probably includes the labor for all the upgrades the shop installed). Do you feel I can offset most of these costs by running the car OBD2, or that actually a more expensive route?

I know the oil pan is required for clearance, but maybe I could avoid about $1000 just not doing the obd2-obd1 swap, with less issues in the future.

Thank you very much for this!

[MrSlacker]

$8000 is somewhat realistic price. It depends if you are in a rush or not - can you wait to find a good deal on a motor or do you want to do it ASAP and just buy whatever you find now. Then things like amount of maintenance, type of chip, OBDI or II and other misc items will dictate the price. Do you want a fancy exhaust or something that just works, what kind of catback?

You should estimate around $6000-$7000 for parts and motor, not including labor to do it right. If you are not in a rush, I can help you. I also have a 88K miles S52 that we can swap for you so it would be a one stop shopping for you.

[ACHTUNG]

Do you feel I can offset most of these costs by running the car OBD2, or that actually a more expensive route?

I know the oil pan is required for clearance, but maybe I could avoid about $1000 just not doing the obd2-obd1 swap, with less issues in the future.

This is a good thread to read regarding OBD1 vs. OBD2:

http://www.r3vlimited.com/board/showthread.php?t=230879&highlight=OBD2

[essi1553]

$8000 is somewhat realistic price. It depends if you are in a rush or not - can you wait to find a good deal on a motor or do you want to do it ASAP and just buy whatever you find now. Then things like amount of maintenance, type of chip, OBDI or II and other misc items will dictate the price. Do you want a fancy exhaust or something that just works, what kind of catback?

You should estimate around $6000-$7000 for parts and motor, not including labor to do it right. If you are not in a rush, I can help you. I also have a 88K miles S52 that we can swap for you so it would be a one stop shopping for you.

I am not in a rush, but im looking at rollers or specfic well body'ed 88+ e30's. There are two I am really interested in now but holding the shell and waiting for the motor setup is always an option.

I am least worried about the exhaust, just something legal that will pass inspection. Ill change that stuff later in my driveway.

Your proposal sounds interesting, would you have everything I would need for the swap? Including an actual shop to do the work in?

[MrSlacker]

I am not in a rush, but im looking at rollers or specfic well body'ed 88+ e30's. There are two I am really interested in now but holding the shell and waiting for the motor setup is always an option.

I am least worried about the exhaust, just something legal that will pass inspection. Ill change that stuff later in my driveway.

Your proposal sounds interesting, would you have everything I would need for the swap? Including an actual shop to do the work in?

24V swap requires a custom made mid section. Rouge is working on a bolt in version right now, but its in $1000 range and not yet available. Therefore its something that should be done correctly from beginning.

PM'ed you more details

[ACHTUNG]

24V swap requires a custom made mid section.

This is true

[essi1553]

This is a good thread to read regarding OBD1 vs. OBD2:
http://www.r3vlimited.com/board/show...highlight=OBD2

Thats the thread that got my interest into an obd2 swap, and just the fact that ill be able to diagnosis some of the issues that will occur with the car, eventually.

Everyone's be very helpful here and thank you all for that, theres simply too much info for me to accurately decipher whats the proper route. I never would have anticipated a $1000 exhaust system for this swap... and these are the costs that get outta control.

[ACHTUNG]

I don't think you'll save much if you stay OBD2 since there aren't a lot of tuning options. Reflashing your ECU still comes at a cost and if your motor doesn't come with all of the sensors you'll have to source them. You may save a bit of dough but I can't say how much.

You don't need a $1K exhaust system. Some have done a custom exhaust for around $500-$600.

http://www.r3vlimited.com/board/showthread.php?t=69373&highlight=exhaust

[e30polak]

I would highly recommend talking to Levent at Guten Parts about doing your swap. He's a great guy and one of the most trustworthy and honest people in the business.

x 1,000,000!!! 8)

[essi1553]

I don't think you'll save much if you stay OBD2 since there aren't a lot of tuning options. Reflashing your ECU still comes at a cost and if your motor doesn't come with all of the sensors you'll have to source them. You may save a bit of dough but I can't say how much.

You don't need a $1K exhaust system. Some have done a custom exhaust for around $500-$600.

http://www.r3vlimited.com/board/show...hlight=exhaust

I'm aiming to get major engine parts out of running vehicle with all the sensor and accessories attached. I figure a flash is a most effective solution as I dont plan on racing or driving the car excessively hard. I think that was about 250-350 in itself. I know very little of exhaust options except that I would need to run at least 2 o2 sensors to be legal in NJ i believe, and im not looking for anything obnoxious, just clean sturdy and at this point cost effective.

I didnt notice that thread before, its a great resource, thanks.

[sharky]

We are doing a S50 E30 at our shop right now and with a customer supplied engine and trans all complete was 2K add in all the swap parts, exhaust, labor little odds and ends, some maintainence etc and his shop bill is close to 4k and will prob just touch over it all said and done. This was us sourcing all swap parts, installing them all, removing M20, fabbing wire harness etc. He got a great deal on a complete engine with everything he needed in good condition so that helped out. I think 6-8K is where you should be, I would love to do your swap but since you are in NJ Levent is your local Guru.

[EDirtyZ]

RGMW will do the whole thing with all the swap parts if you provide the engine and trans. his name is Ryan G. and will do it all for 2500