Announcement

Collapse
No announcement yet.

Ob1 24v swap harness misery wire?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Ob1 24v swap harness misery wire?

    Any one knows where and what this wire does in the ob1 harness is a black&green wire it comes with the harness! Can some tell if a signal wire or where it should be connected thanks in advance!

    #2
    Download the ETM from wedophones.com and have fun.
    2006 GMC Sierra 2500HD 4WD LBZ/Allison
    2002 BMW M3 Alpinweiß/Black
    1999 323i GTS2 Alpinweiß
    1995 M3 Dakargelb/Black
    - S50B32/S6S420G/3.91
    1990 325is Brilliantrot/Tan
    1989 M3 Alpinweiß/Black

    Hers: 1996 Porsche 911 Turbo Black/Black
    Hers: 1988 325iX Coupe Diamantschwartz/Black 5spd

    sigpic

    Comment


      #3
      Ok sounds like I'll have lots fun!

      Comment


        #4
        Picture?

        Is it anywhere near the wires that go to the starter?

        Comment


          #5
          Yes it is near the starter! So is it a signal wire?

          Comment


            #6
            If it's just a bare wire I'm 99% certain it's the wire to your starter to tell it to spin. Should have a ring wiring connector on it but it could have been cut or something. Can't remember if it's the 8mm or 10mm nut on the starter, thinking the 10 though.

            Comment


              #7
              Yes it is something like that! Thank you I'll check it out!

              Comment


                #8
                he is correct starter wire...
                sigpic
                Who`s attention, and why do I have to pay them?

                Comment

                Working...
                X