Getrag 250 vs ZF trans ratios

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Roysneon
    R3V Elite
    • Apr 2010
    • 4505
    #1

    Getrag 250 vs ZF trans ratios

    How much different (if at all) are the ratios between a ZF and a G250? I'm running a Getrag right now but may want to upgrade to the stronger/newer unit later and don't want to have to change the rear diff to compensate at the time.

    Also, would I need a different driveshaft? Using the E36 325is part that matches the G250.
    For all things 24v, check out Markert Motorworks!
    Originally posted by mbonanni
    I hate modded emtree, I hate modded cawrz, I hate jdm, I hate swag, I hate stanceyolokids, I hate bags (on cars), I hate stuff that is slowz, I hate tires.

    I am a pursit now.
    Tags: None
    • 328ijunkie
      Forum Sponsor
      • May 2007
      • 3961
      #2
      Barley different at all. Were talking like .05 difference in some gears.
      You would need a ZF DS.

      Check Us out on Facebook
      Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
      Full Product Line Tuning
      OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

        Comment

        • 328ijunkie
          Forum Sponsor
          • May 2007
          • 3961
          #3
          (Ninja Edit)
          I win:

          Check Us out on Facebook
          Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
          Full Product Line Tuning
          OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

            Comment

            • pwagon717
              E30 Enthusiast
              • Jun 2007
              • 1197
              #4
              You could not use the ETA driveshaft? Need to source either one really.
              _________

              Rep Savannah Crew

                Comment

                • 328ijunkie
                  Forum Sponsor
                  • May 2007
                  • 3961
                  #5
                  You can

                  Check Us out on Facebook
                  Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
                  Full Product Line Tuning
                  OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread

                    Comment

                    Previous template Next
                    Working...