Does anyone who's done the swaphave pics of how much they newses to modify the selector rod? I have the modified trans brace but I fogired if I could get specs/pics on the modification I can do it now so it'll be ready when I install everything. Thanks
-
-
twist the rod 10 degrees. 1 end in a vice, adjustable wrench around the other end, heat if you wish but I didn't need heat to twist mine. Another way would be to cut it, align the pieces 10 degrees twisted and weld it back together. -
Sweet thanksComment
-
FYI also.. If your running a short shift lever or ever plan to and your driveshaft has a dampner donut, you will need to bend it clear that as well.Comment
-
I took my vibration damper off and have not had any problems.Comment
-
Crap, they are removable? i thought they are riveted in.. I would have done that too..Comment
-
the bolts that hold it on are splined so you just hammer them out of the driveshaft, remove the damper, then hammer the bolts back in.Comment
-
Mines already gone. It hit with stock drivetrain and z3 shifterComment
Comment