Originally posted by einstein57
View Post
Announcement
Collapse
No announcement yet.
audi a4 1.8t booster/mc *update it's installed!*
Collapse
X
-
Before you remove the clevis from the e30 booster. Measure from the flat part on the booster (the one that's against the firewall) to the end of the clevis.
You'll need to rethread the clevis to the same size as the Audi pushrod. You'll also have to cut down the Audi rod a few inchs back but with the measurement you took on the e30 booster, you can determine how much of the rod to cut off.
Comment
-
Originally posted by Mr.SWISS View PostPulled trigger on audi booster last night.
Swiss review coming soon....
Comment
-
So far yes, Just waiting on my welder to come and weld a small crack by my strut tower. Then I can paint. I did a mockup and all of the stock lines can be bent to work making this a good candidate for others. How much did you shorten the Booster rod? I already rethreaded the stock e30 one which was really easy.
Comment
Comment