Check your 6th plug hole. My engine started stuttering and I thought a coil went bad but soon learned that there was washer fluid around the 6th plug. Probably a leaking washer line since the pass. side takes longer to spray.
Doh!
Doh!
-
-
Yeah man, I had some water build up in my spark plug holes, then freeze overnight... the car would run great until the ice melted, about halfway to work.. then start misfiring.
Got a cover on there now -
Mine ran fine until the engine got hot and the fluid (although very little of it) started to boil. I guess it then condensed up in the coil plug.
Glad I found it, I was about to buy a new coil.Comment
-
Pro tip if you're going to run without it - careful opening a wet hood. I noticed when washing that opening up the hood often results in a drip right onto that location. Covered it since.Comment
-
Unsure of actual location? Picture? I've been battling a misfire issue.Comment
-
Cylinder nearest to the firewall (in my case).
Take out the coil, get a good light (used iPhone LED) and look closely for liquid around the sparkplug.Comment
Comment