Power steering lines

[ClausE30]

Hey guys,

I'm trying to hook up the power steering lines for my s52. I've read the e30 lines work but that some bending may be needed to reach the stock e36 reservoir position. Is the line that needs bending the one coming off the pump to the reservoir? Can anyone shoot a pic of the way you have it routed? Thanks

[caesar101]

I doubt the e30 line will work, check the pump end size. An e36 line will work, but doesn't look all that good installed. Custom is the best bet if you want it to fit and look OK/

[318isbmw]

Right now I'm using stock e36 lines, but on my last swap I ran stock e30 lines and it worked just fine.

[amcink]

Right now I'm using stock e36 lines, but on my last swap I ran stock e30 lines and it worked just fine.

Photos please, this is my next challenge

[ClausE30]

I used some heat and a pipe and was able to bend the e30 lines 8-) I just had to bend the line coming off the pump to res

[Link]

Photos?

[ClausE30]

I'll get some tomorrow. Still need to hook up everything after having to pull the motor again

[Link]

Photos still coming for this? Would be great if so!