Announcement

Collapse
No announcement yet.

E30 s50 swap won't start please help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    E30 s50 swap won't start please help

    Hey guys I recently put a 1995 m3 motor in my 1992 e30 convertable every thing is done just. Can't get it to run .. I'm using a tree house racing adapter so wiring shouldn't be an issue tested in a friends car and it worked .. I started car with quick start and I had to jump a power wire to starter to start car .. Once I guess whatever quick start was finished it would shut of ..can some please help thanks

    #2
    You are not getting power from the ignition switch to the starter "RUN" post. Check and see why, is it because of the bad wiring, bad clutch switch?

    Also looks like injectors are not delivering fuel, but ignition coils are able to run the engine while the starter fluid is present. Check fuel pressure delivery. Lift the injectors out of the intake manifold, check and see if they are all working.

    Comment


      #3
      Thank I will check these thing tommoro ..... Again thanks

      Comment


        #4
        I got car to start and run but not with key.i have to send power to the fuel pump wire and send power to starter wire .i am not getting no signal when I turn key on to start......help help please

        Comment


          #5
          Go through your C101. Just because it worked in a friends car doesn't mean it will work in yours.
          1987 325is - S52

          Comment


            #6
            If you paid treehouse for an m50 adaptor call and get them to sort it out.

            615-333-9118


            If you bought it used it's sounds like it's not correct for your car, so you'll need research the ETMs for both your chassis and the donor motor to re-pin it for your car.

            Comment


              #7
              Thanks guys got it working

              Comment


                #8
                what was the fix?

                Comment


                  #9
                  Starting issue

                  Removed the adapter and wired it my self started rt up

                  Comment


                    #10
                    Did that adapter not delete EWS?

                    Comment

                    Working...
                    X