Weighed my m50 318is

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • chrisbmx68
    Grease Monkey
    • Apr 2010
    • 358

    #1

    Weighed my m50 318is

    1991 318is slicktop
    m50 nv swap
    reinforced skid plate and front rad support
    no ps, ac, or airbag components
    stainless header and 2.5" exhaust
    lwfw
    getrag 240 trans
    megan coilovers
    front and rear strut braces
    medium case diff
    3/4 tank of gas and complete interior spare tire etc




    with driver (left and right sides are reversed got the wires mixed up)

    without driver
  • golde30
    R3V OG
    • Nov 2003
    • 11464

    #2
    those numbers seem about rite.
    IG: @Baye30

    FRONT VALENCE IS ZENDER!!! STOP FILLING MY PM BOX PPL!!!

    Comment

    • chrisbmx68
      Grease Monkey
      • Apr 2010
      • 358

      #3
      yup seems pretty spot on to me just figured it might be helpful to someone else. I would imagine if I had a zf or g260 it would be even closer to balanced f to r.

      Comment

      • Fernflex
        Wrencher
        • Apr 2010
        • 264

        #4
        My 1987 325i s52 with me. weights around 2600 and having 253 whp is very fun to drive.
        Please Rate Me:
        http://www.r3vlimited.com/board/show...35#post3283535
        ________________
        1987 332i Track Car (253whp)

        --------------------
        __________________

        Comment

        • Subtle
          Wrencher
          • Jul 2013
          • 289

          #5
          Originally posted by chrisbmx68
          yup seems pretty spot on to me just figured it might be helpful to someone else. I would imagine if I had a zf or g260 it would be even closer to balanced f to r.
          This is perfect, I'm a weight and balance tech for aircraft and I made a spread sheet of expected weight and I have a '91 318is with a m50 w/ vanos. And that's about what I estimated. Good to know im not bad at my job hahaha
          '91 318is w/ M50B25TU

          Comment

          • LivingLegend06
            E30 Mastermind
            • Dec 2006
            • 1604

            #6
            My 89i with an M50NV, G260, medium case lsd, 1/4 tank of gas, full interior, power steering, spare tire and 180lb driver came in at 2700lbs. Only weight reduction is removal of ac and trunk tar.

            Comment

            • Subtle
              Wrencher
              • Jul 2013
              • 289

              #7
              I should be corner balancing mine soon enough and ill be sure to put the results up here
              '91 318is w/ M50B25TU

              Comment

              • dougsic
                Wrencher
                • Jun 2006
                • 284

                #8
                '93 vert with full tank, airbag wheel, A/C etc. s50 with headers. 2917 lbs.

                Comment

                • Jean
                  Moderator
                  • Aug 2006
                  • 18228

                  #9
                  Nic! Just to compare my mt1 84 318i chassis with all 325i running gear / full interior etc / with m30b35 swap and half a tank of gas on similar corner weight scales measured 250x lbs.
                  Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



                  OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

                  Comment

                  • craz azn
                    Mod Crazy
                    • Jul 2004
                    • 740

                    #10
                    My car is similarly specced, and it too weighs in the same ballpark. '91 non-sunroof, M52, Getrag 250, med-case 3.73LSD, etc. 1/4 tank of gas.


                    Rippin' Proper | Youtube | Vimeo |

                    Comment

                    Working...