M52 rebuild help

[n8ge]

Hello all...

I was just wondering what parts I ALL need for my m52 rebuild, I just want to get all the parts at once and just rebuild it all at once. Are there any kits out there reasonably priced or am I going to have to have to piece it together? If so, could someone include a list I would need for every part? And what brand is suggested. I know it's a lot to ask, but I would GREATLY appreciate it. I'm a noob. But thanks for your time, I hope someone helps me lol. :-(

[n8ge]

Head Gasket Set
Lower End Gasket Set
Valve Cover Nut Bushings
Head Bolts
Rod Bearings
Main Bearings
MaxSil Tefcote Pistons
Sealed Power Rings
Timing Chains - Upper and Lower
Timing Chain Guide Rails - Upper and Lower
Timing Chain Tensioners - Upper and Lower
Timing Chain Tensioner Piston
Oil Pump Chain
----------------------
What else?

[mitten_e30]

I recently rebuilt my m52. Everything above listed I got my parts from pelicanparts.com. Very good prices and fast shipping. I went with arps head studs they are around the same price if i remember right the oem ones are like $16 a peice. Good luck with build.

[mitten_e30]

Forgot to add get rod and main cap bolts! they are tty bolts and cant be re-used.

[essi1553]

Upgrade the Oil pump while your down there. Also a good time to rebuild vanos (depending on engine mileage)

Exhaust manifold studs and nuts, thermostat housing, hoses below intake manifold, upgraded ARP hardware, but it depends on the extent of the build. There are so many options to consider "while you're in there" becomes very dangerous. Don't forget to put some money aside for clutch.

[n8ge]

Thanks guys! I really appreciate your help! I will do all suggested.