PNP Adapter Harness Wiring for M50, M52, S50, & S52 (And MORE!)

[sweet3]

bump for the 4th!

[sweet3]

bump

[sweet3]

Finally getting around to doing the ac in my car. 88 325i with m52. But I have lost my instructions. How do I get power to the AC wire?

PM sent

[Daeldalus]

Finally getting around to doing the ac in my car. 88 325i with m52. But I have lost my instructions. How do I get power to the AC wire?

[KKassem]

Ordered up my harness last Wednesday and it shipped out Friday!
Got it yesterday and it looks amazing.
Great customer service thru the entire process.

Stoked to get the swap started.
Thank you!

[sweet3]

Check out a review of our harnesses from one of our customers. Thanks Mark!

https://youtu.be/7Uau9WxunXo

[sweet3]

Spring Price update. These wont stay this low for long.
Quality will still be superior.

[sweet3]

bump

[sweet3]

TeXJ, that’s great that you noticed that. Keep us posted if that solves your issue.

J171, excellent, I can make one for you. PM replied.

[J171]

PM sent..

I'm looking for a harness adapter from E21 to s52..

Cheers
Jay

[TeXJ]

I sell mainly the adapters that join the 24v harnesses to the e30 chassis.
However, I am also able to modify your 24v harness.
If you would like, I can take a look at your harness and make sure all of the wiring is fine.
If you're getting MAF codes, I would suggest looking for vacuum leaks, the smallest leak can trigger a MAF code (such as your oil dipstick oring).

I had the intake off and was looking at the fuel pressure regulator and noticed that the oil dipstick didn't have a tight fit to the line that goes to the pan.

Let me look into that more.

Thank you!

[sweet3]

Question, so I bought the car(in my sig) already swapped. Been having issues mainly with the MAF and not sure it's getting the correct signal.

So are you selling the engine harness complete or is it an adapter that goes from the factory m52 engine harness to the e30 chassis harness?

What I'd like is a new engine harness to replace the previous owner's "work".

m52b28, obd1

I sell mainly the adapters that join the 24v harnesses to the e30 chassis.
However, I am also able to modify your 24v harness.
If you would like, I can take a look at your harness and make sure all of the wiring is fine.
If you're getting MAF codes, I would suggest looking for vacuum leaks, the smallest leak can trigger a MAF code (such as your oil dipstick oring).

[TeXJ]

Question, so I bought the car(in my sig) already swapped. Been having issues mainly with the MAF and not sure it's getting the correct signal.

So are you selling the engine harness complete or is it an adapter that goes from the factory m52 engine harness to the e30 chassis harness?

What I'd like is a new engine harness to replace the previous owner's "work".

m52b28, obd1

[sweet3]

bump

[sweet3]

bump