This is my last wiring question...really

[02stu]

Thanks, I don't have power at the ignition wire. I guess I'll try to hot wire the green wire to the battery, hopefully I won't hurt anything.
stu

[rs4pro3]

I'd pull the steering column covers off, and check to see that power is coming out of the ignition switch with the key turned threw that green wire. But just hooking 12V to it shouldn't hurt anything(as long as everything else is wired correctly)

[02stu]

ecu is on, there is power at the red/white wire now. However no spark, no fuel.

[02stu]

Now I have fuel, all the relays are clicking on I have power and ground at the coils but no signal. They are not firing, wtf.

[rs4pro3]

Is the engine cranking?

[02stu]

yep

[Jason89i]

there are very few reasons that will cause a no fire for the m50. ews, crank position sensor, harmonic balincer misaligned w/ tdc, and poor grounding.

cheers, jason

[Bennetts22@aol.com]

hey jason it was a great time at blackhawk. good thing i left when i did the water pump had some serious leaking when i got home. did you what pics of the 90 m3 shell??
cheers brandon