Announcement

Collapse
No announcement yet.

M52B28 swapped - engine cut off when cold start

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    M52B28 swapped - engine cut off when cold start

    This happened recently to my E30 with M52B28 swap. Start the car in morning, idle drop immediately and die. I need to hold the throttle to maintain the idle for about 30 to 60 seconds, then it'll idle ok.

    Where should I start to troubleshooting ? I suspect it could be coolant temperature sensor.

    #2
    Check for vacuum leaks, closely check the hose that runs to the ICV. The intake boots can crack on these as well if you are using a stock style (non silicone). That is where I would start.

    Comment


      #3
      Yeah, check the temp sensor
      Current Collection: 1990 325is // 1987 325i Vert // 2003 525i 5spd // 1985 380SL // 1992 Ranger 5spd // 2005 Avalanche // 2024 Honda Grom SP // 2024 Yamaha XSR700 // 2024 Jeep Gladiator Rubicon

      Comment


        #4
        I had something very similar happen to my e39 when I first got it. Previous owner thought it was vanos seals, which I replaced. Still had some cold start issues and I replaced the MAF and it mostly went away. I still had a hard time starting on cooler mornings, and I eventually arrowed it down to likely being a dirty ICV. I would try the ICV first and keep checking from there.

        Comment

        Working...
        X