318is => e36 m50 wiring

[02stu]

The pm I sent you didn't work?

[Mike B.]

I have the chassis side completed for my '91 318is. I'll post it on Monday after I get the euro 3.2 in the car.

[asubimmer]

anyone?

[asubimmer]

I did the same swap.

91' m42 using a 95' m50 from an auto

I can dig up the diagrams if you like.
I used a combo of akg's and addissimos diagrams

that would be great if you could do that!

[1990m3]

sorry i can't help. I live 40 minutes from AKG, I just gave him my harness and he gave it back good to go!

[KangamangusDriver]

I did the same swap.

91' m42 using a 95' m50 from an auto

I can dig up the diagrams if you like.
I used a combo of akg's and addissimos diagrams

[matt]

Get ETMs for your car and your motor. Between them and the two bentley's it's pretty easy to figure out. Match wire colors and sizes, rather than pin locations in the C101/X20 connector.

[asubimmer]

its FS if you are intersted but stay on topic cause I posted the thread for help not to discuss my car ;)

[e304me]

ummm what happend to the turbo?

[asubimmer]

I know there are tons of threads out there about the wiring but I'm having a hard time finding anything on the 318is to m50. I have a 94' e36 vanos m50 and a 91' 318is car that its going in.

Also my engine was off an auto e36 and the harness has two plugs like the dme. One is for the dme but what is the other for?