e36 flywheel options

[kylebes1]

using an m52 and e36 trans can i use the m20 single mass flywheel and normal sachs clutch?

[kylebes1]

http://www.r3vlimited.com/board/show...+mass+flywheel

taht sort of clears it up...

does the e36 starter work with the e30 flywheel, now?

[PiercedE30]

only if you swap the drive gear over.

[erik325i]

Yes, you can use the single mass m20 flywheel with an m50/e36 tranny. You need to have the back of the flywheel machined down and you need to use the e30 starter.

-Erik

[tjhartge]

Yes, you can use the single mass m20 flywheel with an m50/e36 tranny. You need to have the back of the flywheel machined down and you need to use the e30 starter.

-Erik

and don't forget the clutch slave cylinder

you'll havta use the cylinder from the m20 single mass setup