Just a quick fuel related question

[B3M2W5]

Ok small dumb question, When hooking up the fuel lines where do i put the fuel pressure regulator vacuum line to...? Im having trouble with this.
And just to clarify the line Comeing from the Fuel pump (obviously) would go into the fuel in let port (front) of the rail.

[B3M2W5]

Ok now its a little diff, I forgot about the charcoal canister. What lines go where, I am searching right now but if some one can help me out a little bit i would really apreciate it.
Is the fuel evap valve nessasary ??

[B3M2W5]

OK bump any one shed some light on me. EH

[matt]

You need a short vac hose from the fuel pressure regulator to the barb on the bottom of the intake manifold.

As for the charcoal cannister stuff, keep the valve hooked up to the wire, but ditch the rest.

[MR 325]

As for the charcoal cannister stuff, keep the valve hooked up to the wire, but ditch the rest.

What's the reason for keeping the valve plugged in? I ditched everything.

[matt]

It'll throw a code with some software if it isn't there.