Getrag 260 with M3 Flywheel/clutch...

[Fidhle007]

What parts do I need out of the M3 ('95) to make it happen?

We were discussing this at the shop today so I figured I'd post up and see what everyone says.

Thanks!

[golde30]

sigh, this is on what kinda car?

i have a 95 s50 with s50 LTW flywheel, sachs s50 clutch+PP, s50 starter, s50 T/O bearing, getrag 260 pilot bearing, and getrag260 gearbox. works like a charm. no modifications at all, it all bolts up fine.

[Fidhle007]

Cool, that should answer the discussion.

This would a be a late model vert, I think.

[loonibab325i]

Just out of curiosity, can you use the getrag 260 clutch and a e30 flywheel on a s50? Clutches and LTW flywheels for e30s are soo much cheaper! I spent 600+ alone on my ZF tranny clutch!

-Abe.

[Fidhle007]

As far as I've read, there's something that hits on the pan so you either need to mod your flywheel or your pan.

I'm going a different route though, this was a speculative question.

[e30pq]

Just out of curiosity, can you use the getrag 260 clutch and a e30 flywheel on a s50? Clutches and LTW flywheels for e30s are soo much cheaper! I spent 600+ alone on my ZF tranny clutch!

-Abe.

Yes, that is the setup I have on my car.

http://www.r3vlimited.com/board/showthread.php?t=107147