If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
After removing the bracket, check again that the pan fits (flush all around). Mine didn't. I'm still not 100% sure where the changeover is but mine was from a '92 E34 and the baffle cutouts for the oil drains didn't fit. I had to cut them deeper, it was supremely annoying to figure out what was binding (oil pump? pickup? mains?).
dont forget to silicon the 3 edges where the 2 parts of the block meet. you are installing the e34 pick up right?
I siliconed the whole thing. I had no intention of going through all this shit to have an oil leak thanks to a warp or crack or whatever, in the used pan.
I siliconed the whole thing. I had no intention of going through all this shit to have an oil leak thanks to a warp or crack or whatever, in the used pan.
im going to silcon the whole thing. i want no leaks like my e34
Comment