Show your mufflers

[Hartge_H27]

^ i have always wanted to do that.

[vodomagoo]

theres a borla oval race muffler where the stock gas tank was

[Mako18]

I'm just curious, anyone try the ebay exhaust for the e30 or e36? They look decent for the price. I would think the e30 kit would be good for a m50b25, maybe? The e36 kit might be better. Anyone using either?

I guess you could spend the same money and make a similar exhaust maybe better and cheaper.

edit: NVM after a little research on bimmerforums I will stay away from the e36 ebay exhaust.

[tonytony]

it doens't hurt to have one, but i just dont think its all that necessary on rwd car since the exhaust is inline with the engine.

[1991 e30 bmw 318is]

solid as in no flex pipe? I have a few joints in mine with no flex pipe

ya i'm not putting a flex pipe in just wondering if that's ok. ill make a flange on the end of my headers to bolt the exhaust on.

[tonytony]

solid as in no flex pipe? I have a few joints in mine with no flex pipe

[1991 e30 bmw 318is]

Think I'm going to go with a magnaflow 11378. should be cheaper then the flow master. also you guys have flex pipe, flex joints or just solid from the headers to the tips?

[e30polak]

http://s496.photobucket.com/albums/r...t=MOV02277.flv

Sounds great!

[gazellebeigem3]

damn that stainless/TIG welded setup is baller!

[e30s52]

kinda shitty pics. its ss headers into a Y pipe then 3in catback too dual 2.25 and remus muffler.

[BrewCity11]

So guys, right now, with the stock M20 and cats, my UUC System U is wayyy too loud and droney.

Would you expect it to be the same after i swap in an M/S50?

I've heard this exhaust on the E36's they're made for and they don't sound this loud. But, i can't imagine it making that much of a difference after the swap.

Are 24v motors quieter coming out the exhaust?????? lol

[JeffRR]

I'm working on my swap now. 92 non-vanos m50. So far I have ebay headers. I'm thinking I will run dual 2 or dual 2.25 with an X pipe and a flow master 50 series suv it has duals in and out (2.25) Model: 524554. what do you guys think? 2 or 2.25 piping? x pipe close to the headers? and flex pipe or joint? what do you think of the muffler? looking for somthing deep sounding would like it too not sound like my raspy m42.

Mine is ebay headers to dual 2.25" with an X-pipe out to a B&B muffler.

Its got a deep sound at idle and deeper than some other set-ups I've heard but there still is some rasp.

[tonytony]

are those holes for more performance?

[mattdk318i]

If that was a Ansa, it would sound terrific.

[dpgrand]

Now THAT is a muffler!