I posted a little lower about my ebay headers having a rattle. The sound sounds like it is coming from there but I assume the sound could be coming from anywhere and resonating through the exhaust system.
I have listened at the back of the car and I can here the rasp/rattle as well there. So I am unsure what the problem is. The guy at the exhuast shop thinks it is the header. So I have thought about removing the header and going with stock exhuast manifolds. But so many people run those headers and I can't see that being the issue.
So I am wondering where to start. I am thinking I should replace what is cheap (in my setup) first before pulling the headers. So then at least I have better stuff even if I do pull the header and go stock.
This is what I have. Where should I start?
ebay headers,
2 2" pipe about 15" back
magnaflow Y
a small resonator (5" x 8" - from a m42 car)
back through 2.25" pipe to a dynomax super turbo
The Y goes to 2.5" with a flange and then drops to 2.25 for the resonator and super turbo.
I am thinking of starting with replacing the super turbo or maybe the resonator as well.
Or getting rid of the Y and going with 2 resonators and through a dual in dual out muffler.
At this point I am almost embarrassed to drive the car (or at least to push it at all) because it sounds like a chainsaw/2 stroke dirt bike.
What works well? If anyone has brands and model numbers as well.
I have listened at the back of the car and I can here the rasp/rattle as well there. So I am unsure what the problem is. The guy at the exhuast shop thinks it is the header. So I have thought about removing the header and going with stock exhuast manifolds. But so many people run those headers and I can't see that being the issue.
So I am wondering where to start. I am thinking I should replace what is cheap (in my setup) first before pulling the headers. So then at least I have better stuff even if I do pull the header and go stock.
This is what I have. Where should I start?
ebay headers,
2 2" pipe about 15" back
magnaflow Y
a small resonator (5" x 8" - from a m42 car)
back through 2.25" pipe to a dynomax super turbo
The Y goes to 2.5" with a flange and then drops to 2.25 for the resonator and super turbo.
I am thinking of starting with replacing the super turbo or maybe the resonator as well.
Or getting rid of the Y and going with 2 resonators and through a dual in dual out muffler.
At this point I am almost embarrassed to drive the car (or at least to push it at all) because it sounds like a chainsaw/2 stroke dirt bike.
What works well? If anyone has brands and model numbers as well.
Comment