getrag 265 w/ m20 bellhousing on m50?
Collapse
X
-
Have the bellhousing you need. It is for sale on ebay right now, as well as in a FS thread here on R3V. http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem= -
I had one and intended to use it with my S52. But the S52 has plenty of torque pretty much anywhere in the rev range, so it defeats the purpose of having the CR transmission. If it was more rev happy it would be a blast though.Leave a comment:
-
I feel like the zf takes the win in any m50 conversion. I dont really like the tilted factor of the 260 (how do you service it properly, the fill hole is lower than it should be) and 265 sounds like more work than its worth...Leave a comment:
-
Depends on what you want. If I wasnt using the 260 I'd use the ZF. So for me 260>ZF>265. Well, there are a lot of transmissions I'd rather use than the 265, but that is my basic order.Leave a comment:
-
Most people have standard E30's and using the 260 is easy.
Also, a lot of engine deals include the transmission, so a lot of people use the ZF in that case.
The bell housing adapter is pretty hard to come by. They didnt use the 265 behind an M20 for very long.Leave a comment:
-
Should work just fine with an S14 shift linkage, trans support brace, and E30 M3 driveshaft. Sheet metal console might fit fine as well, but I'm not sure if the E12/24/28 consoles are different lengths.Leave a comment:
-
getrag 265 w/ m20 bellhousing on m50?
never heard of anyone doing that, will it work? i've read it can handle more torque than 250/260, but not sure how big it is what what driveshaft to useTags: None

Leave a comment: