Another S52 swap... but this time with a newb!

[jahnaboi]

Guys, what wires are these? Its on the engine side (next to ecu location). Could I just cut these? Better yet back to my first question, what wires are these? Are these just extra wires I won't be needing?

Wire 1 - Color - Red - I'm assuming that's a power feed. Where should I hook that one up to?

Wire 2 (2 wires into one o connector) - Color - wire a) brown wire b)brown /w orange




Don't mind the fuse connector you see. PO of the wiring harness spliced that in, I guess for a power feed for his system.

-Jasper

[jahnaboi]

Yea. Looks pretty oem to me. Here's a picture of the underside (just got back from a party kinda drunk).

[CorvallisBMW]

$3? nice work! it looks awesome.

[318isbmw]

Looks good, hope it fits, probably going to have to take it off to put the motor in, and I'm not quite sure if it'll fit, but good luck w/ that. Mine had to be on the inner fender up ahead.

[jahnaboi]

Didn't get much done today but I did happen to make a 3 dollar remote reservoir! Here's the finished product. Just gotta cut the nipple up front and attach a line for the clutch fluid line. It "should" clear the intake boot now. I've moved it quite a bit but retaining the stock brake fluid sensor wires without extending it. Wasn't too hard to modify the stock e32 reservoir to make it remote. Hope you like it. Looks pretty slick if you ask me.




-Jasper