Hi all,
I found something on this forum about the wiring for an E34 oil level sensor, but don't know if this would be the same for an E38 one (PN: 12611433510). See below:
The only info I found on the internet about the E38 wiring is something on bimmerforum but there is no source given. There they do say the following:
The pinout for the level sensor is:
Pin 1: Power from fuse 22 (switched with ignition position 2), green with white stripe.
Pin 2: Ground, brown.
Pin 3: Signal to DDE, grey with brown stripe.
If this really is true, it looks like I can't wire my E38 oil level sensor up to the C101 connector...
Anyone who could help me on this?
I found something on this forum about the wiring for an E34 oil level sensor, but don't know if this would be the same for an E38 one (PN: 12611433510). See below:
Originally posted by MaxBell
View Post
The pinout for the level sensor is:
Pin 1: Power from fuse 22 (switched with ignition position 2), green with white stripe.
Pin 2: Ground, brown.
Pin 3: Signal to DDE, grey with brown stripe.
If this really is true, it looks like I can't wire my E38 oil level sensor up to the C101 connector...
Anyone who could help me on this?
Comment