M50 + g240 driveshaft options?

[silnc]

I was wondering if an E30 325 driveshaft would work for my g240 with an m50, I know the g240's DS is too long. Just looking for options or if I'm just limited to the e36 325 driveshaft. Any help would be appreciated. Sent from my Moto G (5) Plus using Tapatalk

[Andrew325is]

Why would the G240 driveshaft be too long? Isn't that the one you're suppose to use?

[silnc]

Why would the G240 driveshaft be too long? Isn't that the one you're suppose to use?

The trans will be shifted back a bit to make room for the 24v engine, unless I am mistaken Sent from my Moto G (5) Plus using Tapatalk

[Andrew325is]

Oh, yeah I guess so. This thread says E36 325i manual driveshaft.

https://www.r3vlimited.com/board/forum/e30-technical-forums/24v-engine-swaps/m50-52-s50-52/215116-m50-with-a-g240?t=248157

[PshlosE30]

It's too simple! Bolt everything on, and measure how much length you want the DS...then just go to a machinery shop....they can cut,weld and balance it.... I did that to 2 swaps and everything is fine.....