I bought the car swapped and I'm going through to clean it up now. I've confirmed via part #s that the OBD1 harness comes from an E34 M50 car. I found this connector hanging out in the same area as the DME connector but I can't figure out what it is even with wiring diagrams. Does anyone have an idea?
Announcement
Collapse
No announcement yet.
Mystery connector on E34 M50 OBD1 harness
Collapse
X
-
Jeez I should know this one but can't remember.. was the e34 harness your using from a auto trans.?
1992 M tech 2 Convertible - S50 Swap
1992 e34 Touring- S50 Swap
1992 325i-S50 Swap (SOLD)
1995 e36 M3 Mugello Red - S50 (SOLD)
1991 325i Convertible Laguna Green (SOLD)
1987 325i (SOLD);1992 M tech 2 Convertible (SOLD)
1988 325i Convertible Alpine White (SOLD)
1991 Brilliantrot Convertible 80k Miles (SOLD)
1992 325i Convertible Schwarz (SOLD)
1992 318i Convertible Project-Finished (SOLD)
-
Did some more digging through the diagrams. I believe it's x6003 which is related to the auto trans. All the colors match up with an M50 A4S-310R car, the weird part is the diagram lists the connector as black, 8-pin when the one I'm holding is a black, 12-pin with only 8 of the pins filled. But I can trace all the pins back and they match x6003.'90 325is + S52
sigpic
Comment
Comment