What are the best methods for heater hose routing? I'm kind of lost because I have one hose out the back towards the heater core intlets, and no second hose. Do I have to tee it into the hose that goes to the coolant reservoir?
And what are the alternatives for mounting the E30 brown coolant temp sensor, I've seen you can tap it into the coolant fitting and earth it. I also saw somewhere mention it will fit in the coolant drain plug on the block, but required a shallower depth sensor.
And what are the alternatives for mounting the E30 brown coolant temp sensor, I've seen you can tap it into the coolant fitting and earth it. I also saw somewhere mention it will fit in the coolant drain plug on the block, but required a shallower depth sensor.
Comment