If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hi I have this 3.73 E30 LSD, at least I think it is. I want to confirm but the tag is gone. I know the S is there already for LSD, but can I tell from these markings?
I've never done it....but they say if you spin one output the other output will spin the same direction on a LSD. On a open diff, they will spin opposite.
Originally posted by Matt-B
hey does anyone know anyone who gets upset and makes electronics?
I've never done it....but they say if you spin one output the other output will spin the same direction on a LSD. On a open diff, they will spin opposite.
Its definetly an LSD, they both spin same direction and also has the big S on the bottom that designates the LSD, I am just trying to figure out if its really a 3.73.
Turn it and measure. The input should turn 3.73 times (round up to 3 and 3/4 times) to one revolution of the output. Put some parks, or use some blocks of wood as reference marks if you need to.
Originally posted by Matt-B
hey does anyone know anyone who gets upset and makes electronics?
Comment