VC Rebuild

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • M325i
    Noobie
    • Dec 2010
    • 12

    #1

    VC Rebuild

    Where can I have my center diff rebuilt, or exchanged for reman?

    Also I took a look at realoem and it gives me the part number 27001226481 which is discontinued, would a newer diff 87-up work p/n27241226401 work on my case or do i need a newer case?
    Last edited by M325i; 12-18-2010, 04:16 AM.
  • gw ix
    Advanced Member
    • Jun 2009
    • 158

    #2
    That is an interesting question. I have never seen the pre 87 case or vc. Post up some pictures of your case and vc and I'm sure some one here can tell you.

    Also check this.

    Comment

    • nando
      Moderator
      • Nov 2003
      • 34827

      #3
      the new part superceeds the old one, don't worry about it. there are minor differences internally (different chains and sprockets) but they function the same and are cross compatible.
      Build thread

      Bimmerlabs

      Comment

      • M325i
        Noobie
        • Dec 2010
        • 12

        #4
        Originally posted by nando
        the new part superceeds the old one, don't worry about it. there are minor differences internally (different chains and sprockets) but they function the same and are cross compatible.
        that's good news, I was worried that I might have to buy a whole case.

        Comment

        • M325i
          Noobie
          • Dec 2010
          • 12

          #5
          Originally posted by gw ix
          That is an interesting question. I have never seen the pre 87 case or vc. Post up some pictures of your case and vc and I'm sure some one here can tell you.

          Also check this.

          http://www.e30tech.com/forum/showthread.php?t=96804
          I've seen that post, but my problem is I don't have the tools here to perform this. Someone offered their service over there: http://www.e30tech.com/forum/showthread.php?t=85741
          But the site owner doesn't seem to allow any new users to post or PM so I have not been able to contact him.

          Comment

          Working...